Archives for posts with tag: detail

Complete!

Sadly, this is the first post in a week. Not sure how that happened. Oh yeah, now I remember. Work has been busy, and we’re also building a house.

Good stuff has been happening though. Jesse Oviatt has been cranking away on getting the roof support brackets in place. More on this in a second. And Alexi and his crew worked Thursday and Friday to prep a few things before the roof panels are delivered Monday morning.

I spent this past weekend working with Jesse. I think he was happy for the help and it was fun to be on site, even if it meant working 10 hours a day. We made a ton of progress too, which always feels good.

To be clear, the work we are doing isn’t typical framing work. It’s more like the lovechild of cabinetry and bridge building. It’s fussy work. Were you to look around our work area this weekend, you’d see tools typical for framing a house–circular saws, framing hammers, squares, etc. But you’d also see two routers, a set of woodworking chisels, a japanese pull saw, files and a custom made wrench.

Our architect, Matt Melcher, came out for a few hours on Sunday to work with us. He marked the beams that need to be cut in the morning, installed a slope plate, checked measurements, and helped me cut a rabbet into one of the beams with a router.

This was shocking to Jesse. He had never seen an architect do actual work on site. What can I say? Our boy has some skills!

It’s hard for me to put in words how happy I am with the big “Y” columns. They’re insanely beautiful. I’m not sure how something that massive can look so elegant, but it does. And between the fir, the galvanized metal and the concrete, we have a pretty stellar group of materials working together.

You might expect that because I was on site for so many hours that I’d have a ton of pictures, but I don’t. At least not great ones–mostly taken with my phone. But here you go…

Hopefully the SIPs roof will go up without too many hiccups.

Oh, special thanks to our neighbors, Greg and Jackie, who risked their lives to help us install the posts. With the steel attached those suckers weighed at least a couple hundred pounds each. Not fun.

Advertisements

Saturday was the last warm(ish) day we’ll have for a while. It was also the day Mikel pulled off the last plywood form from our retaining walls. Something tells me he was pretty happy about this milestone. I spent the morning working with him, pulling brad nails from the forms and cleaning a few things up.

Misha: Happy to pull the last form.

Because it was a bit warmer I also pulled off more cedar boards from the concrete. This is tough work to be sure. We’ve had so much wet, cold weather, and the cedar is swollen and partially frozen into the concrete.

Part of why I wanted to do the work now though is because the concrete isn’t fully cured–it’s still “green.” Because of this, the ribs between the cedar boards are still fragile, so when I pull off the boards some ribs stay in tact, while others break off. And I like this look.

The work was much easier than last weekend though. It’s amazing what 10 degrees can do.

Finally, a more complete view of the wall, sans cedar.

Wood grain, concrete ribs and aggregate.

Just a snapshot, but I like the composition of this one.

I a recent post I mentioned that Jesse Oviatt is cutting slots and chamfers into our glulam posts to accept the new brackets. He invited me over to check on progress.

Jesse is a super-meticulous guy and he’s definitely paying attention and making suggestions about details on our project too. When I pulled up he was doing some work with a Japanese pull saw–not something you see people working with everyday.

He started the project by building a router template to help speed up the process. Judging by how clean the mortises look, I think it’s working well.┬áIt’s still early, but Jesse’s making progress and he is genuinely excited about the project. We’re definitely fortunate to be surrounded with the team we have in place.

We also talked about a couple of details (big surprise). Jesse is ultimately going to cut a 1/8″ chamfer on the slots at a 45 degree angle. This is super subtle, but will be quite nice.

Someday when I have a bit more time I’ll put up some other examples of Jesse’s work. In the mean time, if you need a builder or carpenter for a project, you can e-mail Jesse. [oviattconstruction (at) live.com]

Template.

Jesse showing how the metal plates fit into his mortises.

Jesse was the only human out at his shop today, but luckily he’s working under a watchful eyesocket.

Jesse's supervisor.